Skip to main content
Loading…
This section is included in your selections.

A. Site Plans. All Class IV-General and COHP applications submitted pursuant to this Chapter shall include a site plan containing the following information, if applicable:

1. Harvest boundaries and tree retention areas;

2. The approximate location of any structures;

3. The location of all existing and proposed streets, rights-of-way, easements, skid roads, haul roads, and landings within the proposal;

4. The location of future land development such as a building site, septic drainfield areas, and/or well;

5. Site topography at a contour interval of 40 feet;

6. Critical areas and critical area buffers including, but not limited to, wetlands, streams, landslide, wildlife habitat, and erosion hazard areas, regulated pursuant to Title 18E PCC, Critical Areas;

7. Drainage ways; and

8. North seeking arrow and scale shall be shown on all site plans. The scale shall be no smaller than one inch to 200 feet.

B. Field Marking of Site Features. At the time of submittal of any application required pursuant to this Title, the following features shall be clearly marked at the site with flagging or colored paint by the applicant:

1. Critical areas and critical area buffers regulated pursuant to Title 18E PCC, Critical Areas;

2. Landing areas;

3. Tree retention areas; and

4. Cutting boundaries.

(Ord. 2017-89s § 5 (part), 2018; Ord. 2009-18s3 § 6 (part), 2009; Ord. 2004-58s § 5 (part), 2004)